|
|
| NOTE:
|
This product dissipates heat by using convective cooling. The heat and moisture generated by the printing process escape through vents in the product exterior or through the output bin area.
|
| Verify normal product operation
|
| The release of moisture is a result of normal product operation. However, HP recommends using the following steps to verify that the product is releasing steam and does not have a functional problem.
|
| 1.
|
| Turn the product off, and then on.
|
|
| 2.
|
| Send a print job to the product, and then verify that the product is operating correctly.
|
|
| 3.
|
| When printing a job and vapor is visible, immediately reprint the job using the same sheet of paper. There should be either no visible vapor, or much less vapor during the printing process.
|
|
Limit or reduce steam or vapor
| ●
|
| Make sure that the product is placed in a well-ventilated area that meets the environmental specifications in this guide. See Environmental specifications.
|
|
| ●
|
| Do not place the product, or store paper, near an outside entrance where temperature changes can increase humidity.
|
|
| ●
|
| Use an unopened ream of paper that has not been exposed to high humidity.
|
|
| ●
|
| Store paper in an airtight container, where it will be less likely to absorb moisture.
|
|
|
