Use HP Cloud Print to print e-mail messages and attachments by sending them to the product’s e-mail address from any e-mail enabled device.
| NOTE:
|
The product must be connected to a wired or wireless network. To use HP Cloud Print, you must first have access to the Internet and enable HP Web Services.
|
| 1.
|
| Enable HP Web Services in the HP Embedded Web Server (EWS) by following these steps:
|
| a.
|
| After the product is connected to the network, print a configuration page and identify the product IP address.
|
|
| b.
|
| At your computer, open a Web browser and enter the product IP address into the address line. The HP EWS appears.
|
|
| c.
|
| Click the HP Web Services tab. If your network does not use a proxy server to access the Internet, proceed to the next step. If your network uses a proxy server to access the Internet, follow these instructions before proceeding to the next step:
|
| a.
|
| Select the Proxy Settings tab.
|
|
| b.
|
| Select the Check this box if your network uses a proxy server to access the Internet check box.
|
|
| c.
|
| In the Proxy Server field, enter the proxy server address and port number, and then click the Apply button.
|
|
|
| d.
|
| Select the HP Web Services tab and click the Enable button. The product configures the connection to the Internet, and then a message appears informing you that an information sheet will be printed.
|
|
| e.
|
| Click the OK button. An ePrint page prints out. On the ePrint page, look for the e-mail address that is automatically assigned to the product.
|
|
|
| 2.
|
| To print a document, attach it to an e-mail message, and then send the message to the product’s e-mail address. Go to www.hpeprintcenter.com for a list of supported document types
|
|
| 3.
|
| Optionally, use the HP ePrintCenter Web site to define security settings and to configure default print settings for all HP ePrint jobs sent to this product:
|
| a.
|
|
| b.
|
| Click Sign In, and enter your HP ePrintCenter credentials or sign up for a new account.
|
|
| c.
|
| Select your product from the list, or click the + Add printer button to add it. To add the product, you need the product code, which is the segment of the product e-mail address that is before the @ symbol.
|
|
| NOTE:
|
This code is valid for only 24 hours from the time you enable HP Web Services. If it expires, follow the instructions to enable HP Web Services again, and obtain a new code.
|
|
| d.
|
| Click the Setup button. The HP ePrint Settings dialog box appears. Three tabs are available:
|
| ●
|
| Allowed Senders. To prevent your product from printing unexpected documents, click the Allowed Senders tab. Click Allowed Senders Only, and then add the e-mail addresses from which you want to allow ePrint jobs.
|
|
| ●
|
| Print Options. To set up default settings for all ePrint jobs sent to this product, click the Print Options tab, and then select the settings that you want to use.
|
|
| ●
|
| Advanced. To change the product’s e-mail address, click the Advanced tab.
|
|
|
|
HP P1100 Use HP Cloud Print