Declaration of Conformity (HP LaserJet Professional P1102w)

Regulatory information

English

Declaration of Conformity (HP LaserJet Professional P1102w)

Declaration of Conformity
according to ISO/IEC 17050-1 and EN 17050-1
Manufacturer’s Name:
Hewlett-Packard Information Technology R&D (Shanghai) Co., Ltd.
DoC#: BOISB-0901-01-rel.6.0
Manufacturer’s Address:
Building 6, No. 690 BiBo Road, ZhangJiang, Shanghai, China
declares, that the product
Product Name:
HP LaserJet Professional P1102w
Regulatory Model:2)
BOISB-0901-01
Product Options:
ALL
Radio Module3)
BOISB-0803-00
Print Cartridges:
CE285A
conforms to the following Product Specifications:
SAFETY:
IEC 60950-1:2005 / EN60950-1: 2006 +A11:2009
IEC 60825-1:2007 / EN 60825-1:2007 (Class 1 Laser/LED Product)
IEC 62311:2007 / EN62311:2008
GB4943-2001
EMC:
CISPR22:2005 +A1/ EN55022:2006 +A1 – Class B1)
EN 61000-3-2:2006
EN 61000-3-3:2008
EN 55024:1998 +A1 +A2
FCC Title 47 CFR, Part 15 Class B1) / ICES-003, Issue 4
GB9254-2008, GB17625.1-2003
Radio3)
EN 301 489-1 V1.8.1 / EN 301 489-17 V2.1.1
EN 300 328 V1.7.1
FCC Title 47 CFR, Part 15 Subpart C (Section 15.247) / IC: RSS-210
ENERGY USE:
Regulation (EC) No. 1275/2008
ENERGY STAR® Qualified Imaging Equipment Typical Electricity Consumption (TEC) Test Procedure
Supplementary Information:
The product herewith complies with the requirements of the R&TTE Directive 1999/5/EC Annex IV, EMC Directive 2004/108/EC, the Low Voltage Directive 2006/95/EC and the EuP Directive 2005/32/EC, and carries the CE-Marking HP P1100 ce mark 5mm wireless Declaration of Conformity (HP LaserJet Professional P1102w) accordingly.
This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two Conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
1.
The product was tested in a typical configuration with Hewlett-Packard Personal Computer Systems.
2.
For regulatory purposes, this product is assigned a Regulatory model number. This number should not be confused with the product name or the product number(s).
3.
This product uses a radio module device which Regulatory Model number is BOISB–0803-00 as needed to meet technical regulatory requirements for the countries/regions this product will be sold.
Shanghai, China
December 2010
For Regulatory Topics only, contact:
European Contact
Your Local Hewlett-Packard Sales and Service Office or Hewlett-Packard GmbH, Department HQ-TRE / Standards Europe, Herrenberger Straße 140, D-71034 Böblingen (FAX: +49-7031-14-3143) www.hp.eu/certificates
USA Contact
Product Regulations Manager, Hewlett-Packard, 3000 Hanover St., Palo Alto 94304, U.S.A. 1-650-857-1501
HP P1100 Declaration of Conformity (HP LaserJet Professional P1102w)