Replace the separation pad

Manage and maintain the product

 English

Replace the separation pad

Normal use with good media causes wear. The use of poor media might require more frequent replacement of the separation pad.

If the product regularly pulls multiple sheets of media at a time, you might need to change the separation pad.

HP P1100 note Replace the separation pad NOTE:

Before you change the separation pad, clean the pickup roller. See Clean the pickup roller.

HP P1100 alert adm Replace the separation pad WARNING!

Before changing the separation pad, turn the product off, disconnect the power cord from the wall outlet, and then wait for the product to cool.

1.
Disconnect the product power cord from the product.
2.
Remove the paper and close the input tray. Set the product on its front.
3.
At the bottom of the product, unscrew the two screws holding the separation pad in place.

HP P1100 ci sp01 Replace the separation pad

4.
Remove the separation pad.

HP P1100 ci sp02 Replace the separation pad

5.
Insert the new separation pad, and screw it into place.

HP P1100 ci sp03 Replace the separation pad

6.
Reconnect the power cord, and then turn on the product.

HP P1100 ci pp01 Replace the separation pad

HP P1100 Replace the separation pad